Free Video Editor – can't save properly

DVDVideoSoft forums DVDVideoSoft forums Video and audio editing software Free Video Editor – can't save properly

This topic contains 4 replies, has 3 voices, and was last updated by Nikky Nikky 3 years ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #9193

    Harry Heflin
    Participant
    I'm doing something silly wrong here, apparently.  When editing a mp4 file I am able to make three selections to delete, leaving two clips to preserve, but when I click "save video" only the longer clip is saved (and incidentally the clip points on it are off by a second or so).

    If I select "Split by Selections" then the three selections are properly deleted and the remaining two desired clips are properly saved separately, but I would like them to be saved as one joined file.

    What am I doing wrong here?

    Windows 7

    #50265

    Harry Heflin
    Participant
    Yes, Nikky, I had used the guide before and did expand it to show the 'by selection' option to see more guidance.

    But let's just take it one thing at a time.

    First the problem with start time:

    The original file is 01:46:42.667 long, and I need to clip a desired section out of the middle. I did an experiment today to try to understand why the timing of the 'cut' file is not correct.

    I set "Beginning Selection" at 00:18:53.482, and set "End Selection" at 01:45:39.567. Invert selection, and press "Save Video".

    The result should be a file that is 1:26:46:085 long, the but resulting "cut" file begins 5 seconds late at about 00:18:58 and is only 1:26:41 long – about 5 seconds short. (The "cut" file appears to ends at the proper frame as nearly as I can tell.)

    If I try moving the start point back about 5 seconds, the resulting 'cut' file actually begins where I set the start point, and the 'cut' file is correct – but it is not what I want. If I move the start point back only a second, then the 'cut' file still begins late at the same place, about 00:18:58. So as nearly as I can tell the software is inconsistent, at least with the start time of the 'cut' file. None of this makes any sense. I can not get the start point to produce the 'cut' file I want.

    So, I'm not sure I see the point of having "frame" resolution In Video Editor for setting the selection beginning if the actual implemented selection is about 4 or 5 seconds later.

    Am I missing something here?

    Thanks for your help.

    -Harry

    #50266
    Nikky
    Nikky
    Moderator
    Hi Harry! Please send me your video to test:

    1. Download dropbox
    2. Install dropbox on your PC, create an account.
    3. Drop a file into the Public folder.
    4. Right-click this file, then choose Dropbox > Copy Public Link. This copies an Internet link to your file that you should send to our support team.

    #51014
    Hi I have a problem.
    I have installed youtube converter, but when I restart my computer I lose installation of youtube converter and I must start process of installation again from start.
    Please help me.... :-D

    #51016
    Nikky
    Nikky
    Moderator
    Hi Nikoleta!

    Send us the logs and the specialists start analysing your case as soon as possible.

    1. Launch 'Log Report'
    Start → All programs (Apps on Windows 8) → DVDVideoSoft → Log Report or just press Ctrl+Alt+L.
    2. Click 'OK' to open the folder with archived logs.
    3. Send '_logs_to_send' to Help Desk

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Comments are closed.